Fujitsu PRIMERGY SX05 S1, Руководство пользователя

Страница: 26 / 52

26 User Guide
PRIMERGY SX05 S1
PRIMERGY SX05 S1 rack installation
4.1.1 Tools required
If you are installing the tape enclosure in a rack with unmarked holes in the
vertical mounting columns the following items will make the rack installation
easier:
●
Pencil
●
Tape measure
If you are installing the tape enclosure in a rack with threaded holes in the
vertical mounting columns you will need a 3/16” (5mm) flat-blade screwdriver.
4.2 Installing the tape enclosure in a rack
V
WARNING!
To reduce the risk of personal injury or equipment damage, be sure that:
●
The rack leveling jacks are extended to the floor
●
The full weight of the rack rests on the leveling jacks
●
The stabilizing feet are attached to the rack if it is a single rack
installation
●
The racks are coupled in multiple rack installations
●
Only one component is extended at a time. A rack may become
unstable if more than one component is extended for any reason.
When installing the enclosure in a rack:
●
Start at the bottom of the rack, or at the top of a previously mounted
component, and work upward
●
It is recommended to install the heaviest components at the bottom and
lighter ones toward the top of the rack
●
Make sure that the rack-mounting rails are level from front to back