Fujitsu PRIMERGY SX05 S1, Руководство пользователя

Страница: 27 / 52

PRIMERGY SX05 S1
User Guide 27
PRIMERGY SX05 S1 rack installation
4.2.1 Before you begin
If you are installing the tape enclosure in a rack with unmarked holes in the
vertical mounting columns, identify and mark the correct mounting holes in the
rack before you begin rail installation.
V
CAUTION!
It is important to install rack components level. To ensure that the 1U tape
enclosure is installed correctly it may be necessary to measure the
height of the correct mounting holes in the front and rear vertical
mounting columns.
4.2.2 Installing the inner component rails
Inner component rails are the inner portion of the rack rail system that attached
to the tape enclosure.
Ê
Align the slotted holes on the left and right component rails with the three
pins on the sides of the enclosure (1).
Ê
Slide the component rails toward the rear of the enclosure (2) until they lock
into place.
Figure 14: Installing the component rails
I
NOTE:
To remove the component rail, pull out the spring-loaded tab (3) on the
side of the rail and slide it forward (4).