Fujitsu PRIMERGY RX600 S4, Руководство пользователя

Страница: 171 / 230

171
PRIMERGY RX600 S4 User's Guide
7.2.19 Boot Menu
This menu is for specifying the priority order of startup. The names of CD devices and hard disk drive
devices on the display vary depending on the onboard devices.
LAN Settings This is for LAN settings of the Remote Management Controller port.
Set this when performing the remote operation by using RemoteControlService.
Press the [Enter] key to display the [LAN Settings] screen.
Management LAN • Disabled
• Enabled (Initial value) Sets whether to enable the Remote Management
Controller port.
Service LAN Port Service (Unchangeable) This setting is for Service LAN.
DHCP • Disabled (Initial value)
• Enabled Sets whether to obtain a LAN IP address of the Remote
Management Controller port from the DHCP server.
When [Disabled] is set, IP address setting can not be set.
Local IP Address
［ 000.000.000.001 ］
Enter the IP address, subnet mask, and default gateway
of the Remote Management Controller port.
Subnet Mask
［ 000.000.000.000 ］
Gateway Address
［
000.000.000.000
］
IPMI Status Displays IPMI information. Press the [Enter] key to display the [IPMI Status] screen.
table: IPMI submenu
Item Setting Description
Item Specific Help
Change Values -/+
F9
1 : IDE Z : DW-224E-V-(S1)
2 : PCI SCSI : (Bus 16 Dev 00) PCI RAID Ad
3 :
4 :
5 :
6 :
7 :
8 :
: Legacy Network Card
: Alternate Device
Select Item
Select Menu
Enter
F1
Esc Info
Exit
F10
Setup Defaults
Save and Exit
Advanced Security Power Server Boot
Exit
Main
Phoenix TrustedCore(tm) Setup Utility
Select Sub-Menu