Fujitsu PRIMERGY RX600 S4, Руководство пользователя

Страница: 165 / 230

165
PRIMERGY RX600 S4 User's Guide
7.2.13 Server Menu
This menu is for the server settings.
table: Server menu
Item Setting Description
O/S Boot Timeout • Disabled (Initial value)
• Enabled
When ServerView is installed on the OS, this sets
whether to enable the boot monitoring function. When
this function is [Enabled], the system will automatically
restart if the OS startup is stopped for some reason.
The boot monitoring function can also be enabled or
disabled from ServerView.
Note:
` If ServerView is not installed on the OS, be sure
to set this item to [Disabled]. If [Enabled] is set,
the server may not operate as intended. For
example, the power may automatically turn off, or
the server may restart.
` When starting up the system by using
PRIMERGY Startup Disc or DOS floppy disk, be
sure to disable the boot monitoring function.
If the system starts up with this item enabled, the
server may not operate as intended. For
example, the power may automatically turn off, or
the server may restart.
` When setting this function, make sure to read
"ServerView User's Guide" for its specifications,
operation, and settings.
Action • Continue
• Reset (Initial value)
• Power Cycle Sets the action to take if the OS does not start up within
the period set in [Timeout Value].
Timeout Value • 0 (Initial value)
• 1 to 100
Sets the period of timeout in minutes.
Item Specific Help
Change Values
Enter F10
Select Item
Select Menu
Select Sub-Menu
-/+
F1
Esc Info
Exit F9 Setup Defaults
Save and Exit
O/S Boot Timeout :
Action :
Timeout Value :
ASR&R Boot Delay :
Power Cycle Delay :
Temperature Monitoring :
Boot Retry Counter :
CPU Status
Memory Status
PCI Status
Console Redirection
IPMI
[Disabled]
[Reset]
[0]
[2]
[7]
[Disabled]
[3]
Advanced Security Power Server Boot Exit Main
Phoenix TrustedCore(tm) Setup Utility