Fujitsu PRIMERGY RX600 S4, Руководство пользователя

Страница: 164 / 230

164
Chapter 7 Configuring Hardware and Utilities
7.2.12 Power Menu
This menu is for server power settings.
table: Power menu
Item Setting Description
Power-on Source BIOS Controlled (Unchangeable) This setting is for power-on.
LAN • Disabled
• Enabled (Initial value)
Sets whether to enable the power to be turned on via
LAN.
Wake Up Timer Disabled (Unchangeable) Sets whether the power is turned on at a certain time
or after a certain time has passed. A separate
program is required to set startup time.
Wake Up Time [00:00:00]
Sets the startup time when [Wake Up Timer] is used.
Wake Up Mode • Daily (Initial value)
• Monthly Sets the startup mode when [Wake Up Timer] is
used.
Power Failure
Recovery • Always On
• Always Off
• Previous State (Initial value)
Sets a power state for when the electricity is
supplied again after power-off due to such an event
as power outage.
Note:
`
For the UPS scheduled operation, set it to
[Always On]. Otherwise, the server may not
be turned on at the set time.
Item Specific Help
Change Values -/+
F10
Select Item
Select Menu
Select Sub-Menu Enter
F1
Esc Info
Exit
F9
Setup Defaults
Save and Exit
Power-on Source
LAN :
Wake Up Timer :
Wake Up Time :
Wake Up Mode :
Power Failure Recovery :
[BIOS Controlled]
[Enabled]
[Disabled]
[00:00:00]
[Daily]
[Previous State]
Advanced Security Power Server Boot
Exit
Main
Phoenix TrustedCore(tm) Setup Utility