Fujitsu PRIMERGY RX2540 M6 Скачать руководство пользователя страница 118

Страница: 118 / 680

▶

In the

iRMC Update

group, set the

Update Source

Image file

▶

Set the

Image to Flash

to the desired image.

▶

Click

Golden Image Update

Perform

▶

Click

Reboot iRMC

For more information on iRMC settings, see the iRMC user guides.

Updating the golden image using the Redfish API of the iRMC S5

Further information about the Redfish API of the iRMC S5, see the iRMC S5

Redfish documentation on the Fujitsu support internet pages at:

https://ts.fujitsu.com/support/

5.3.18.2

Updating the golden image for BIOS firmware

The golden image is part of the PFR (Platform Firmware Resiliency)

feature.
The PFR feature provides protection of firmware, detection of tampered

firmware and automatic recovery of firmware.

Prior to the firmware update the image file to be used is checked.

●

The image file is verified to prevent an unauthorized image from being used.

●

It is checked if the image file has been tampered with.

If the result of the check shows that the image file is not the original one any

longer, system will automatically recover the image by golden image. This

golden image is used for recovery and overwrites the tampered firmware

image.
During the recovery process of the BIOS firmware image do not power-off/on

the server. The detection of a tampered firmware image and its recovery are

logged to the system event log (SEL). The BIOS settings will return to what

they were when you updated the golden image.

Basic software procedures

118

Upgrade and Maintenance Manual

RX2540 M6

Содержание PRIMERGY RX2540 M6









































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PRIMERGY RX2540 M6

Отзывы:

Похожие инструкции для PRIMERGY RX2540 M6

Бренды по названию

Популярные бренды

Fujitsu PRIMERGY RX2540 M6, Руководство по модернизации и обслуживанию

Результаты поиска

Содержание PRIMERGY RX2540 M6

Отзывы:

Похожие инструкции для PRIMERGY RX2540 M6

Бренды по названию

Популярные бренды