PRIMERGY 10GbE Connection Blade 18/8 User Guide
55 / 95
4.
Default Settings
4.1
Switch Mode
Item
Default Setting
Switching method
Cut through switching
Port information
ETHER port
1~18
(Downlink)
19~26
(Uplink)
oob
(
MMB connection link
)
Data transfer rate
10Gbps
10Gbps
10/100Mbps
(Auto-detect)
Full/half duplex
Full-duplex(Fixed)
Full-duplex(Fixed)
Auto-detect
MDI/MDI-X
-
-
Flow control
Tx:OFF, Rx:ON
Tx:ON(Fixed)
Rx:ON(Fixed)
VLAN
VID 1 (no tag)
-
Protocol VLAN
Predefined protocol
IPv4
、
IPv6
Link down relay
Disabled
GVRP
Disabled
Link aggregation
Load balancing algorithm
Destination MAC address, Source MAC address
Back up port
Port selection scheme
Master port preferred
STP information
STP operating mode
MSTP enabled for Uplink ports / Disabled for downlinks
LLDP
Disabled
Broadcast/Multicast
storm
control
Enabled
Threshold value for broadcast storm control: 2Gbps
Threshold value for multicast storm control: 2Gbps
Converged Enhance Ethernet
Disabled
Output rate control
Disabled
Reflective Relay
Disabled
IGMP snooping
Disabled
MLD snooping
Disabled
GMRP
Disabled
IEEE802.1X authentication
Disabled
Web authentication
Disabled
MAC address authentication
Disabled
RADIUS client
Disabled
client
Disabled
LDAP Client
Disabled
IP interface
In-band = None/OOB = DHCP
Password information
User name
admin
Password
admin
ACL information
None
SNMP information
Disabled
DHCP/DNS client
Enabled on oob
telnet/SSH auto logoff
5 min
Console auto logoff
8 hours
System log information
System log send
Disable
Facility
23
(
local7
)