PRIMERGY 10GbE Connection Blade 18/8 User Guide
21 / 95
2.10
Initializing Connection Blade with Backup Firm
You can initialize The PRIMERGY 10GbE Connection Blade 18/8 and back to factory default with backup
firmware.
Step1:
Boot up The PRIMERGY 10GbE Connection Blade 18/8.
Step2:
Press [Ctrl + B] key during displaying Booting…
Backup firmware boot up.
Booting ...
Backup firmware mode.
Step3:
Enter the following commands
>logon Logon backup firmware
backup# reset clear Initialize and reboot
2.11
Recovery Firmware with Backup Firm
You can recovery firmware with backup firm if switch software and IBP software are corrupted.
Step1:
Logon backup firmware with 2.10 procedure.
Step2:
Configure oob ip address with the following commands
backup# oob ip address 192.168.1.10/24 3
backup# commit
Step3:
logout backup firmware
backup# exit
>
Step4:
Update firmware with ftp command from ftp client.