PRIMERGY 10GbE Connection Blade 18/8 User Guide
20 / 95
Restore Configuration
Example) Restore config1-1 to config1.
C:<config>ftp 192.168.1.10 Connect with FTP to Connection Blade
User (192.168.1.100:(none)): admin Enter User Name
331 Password required for admin.
Password:admin Enter Password
230 User admin logged in.
ftp> bin Change to binary mode
200 Type set to I
ftp>put config1-1 config1 Restore config1-1 to config1
・
・
226 Write complete
2856 bytes sent in 1.10 seconds (2.44 Kbytes/s)
ftp>get reset Restart connection blade
・
・
ftp>bye
221 Goodbye
C:<config>
2.8.5
Clearing Configuration
You can clear configuration with reset clear command.
#reset clear
2.9
Updating Firmware
You can update firmware with the following procedure.
Example) Updating Firmware in figure 8 configuration.
C:<firm>ftp 192.168.1.10 Connect with FTP to Connection Blade
User (192.168.1.100:(none)): admin Enter User Name
331 Password required for admin.
Password:admin Enter Password
230 User admin logged in.
ftp> bin Change to binary mode
ftp> put
SBAX2V0200BIND_NY48 bindfirm Update firmware
Firmware
Put command
BIND Firmware
put <firmware filename> bindfirm
Firmware is applied after hard reset.
<Note>
If your PRIMERGY 10GbE Connection Blade 18/8 is running with V02.00 NYxxxx and you’d like to
use EHM from now on, please see Chapter 2.6.
