Fujitsu PRIMEPOWER900, Руководство пользователя

Страница: 90 / 177

60 U41290-J-Z816-3-76
CHAPTER 5 Main Unit Operator Panel
• To Select the OS dump command:
1 Press the Cursor switch to move the solid square indication (
<
) to REQ.
2 Press the Decision switch.
The confirmation message “REQUEST OK?” is displayed.
3 To perform a dump of the operating system, press the Decision switch again.
To cancel this operation, press the Cursor switch instead of the Decision
switch, and the LCD display then returns to the state of the procedure 3.
•
To select the partition startup command:
1 Press the Cursor switch to move the solid square indication (
<
) to UP.
Pressing the Cursor switch moves (
<
) to REQ, RST, and UP, in this order.
Continuing to press the Cursor switch cancels this operation, and the LCD
display returns to the state of the procedure 3.
2 Press the Decision switch.
The confirmation message “PARTITION UP OK?” is displayed.
3 To perform startup of the partition, press the Decision switch again. To cancel
this operation, press the Cursor switch instead of the Decision switch, and the
LCD display then returns to the state of the procedure 3.