Fujitsu Plasmavision PDS4213W-H Скачать руководство пользователя

Страница: 6 / 46

E-4

FEATURES

This display has a plasma display panel and is only 8.5 cm deep. With its high image quality and performance, it is perfectly suited to
multimedia applications.

Can receive a variety of input signals

• In addition to video, S-video, and RGB1 (mD-sub Connector), RGB2 (BNC x 5 connector) signals, this display supports input of high-

quality video signals such as DVD and HDTV.

• The display is applicable to the following color television systems used worldwide: NTSC, PAL, SECAM, N-PAL, M-PAL, 4.43NTSC.

• The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital

broadcasting signals (color difference signals).

• The display has an RGB input terminal to receive signals, including wide RGB signals

, VGA, SVGA, and XGA

5 screen sizes (video input mode) and 3 screen sizes (RGB input mode)

• This display offers a total of five different screen sizes in video input mode: Wide1, Wide2, Zoom1, and Zoom2. A Normal mode is

also available, for display of normal-size (4:3 aspect ratio) images.

• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.

Install the display lengthwise

• The display can be installed lengthwise, enabling advertising to be displayed. In this case, you can set up the display so that on-screen

information, such as input modes and menus, is displayed properly.

Power management function

• The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.

Flexible enough to be used as part of a system

• You can operate the display by remote control using the RS-232C interface.

• If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.

Others

• You can specify the color temperature.

• Two-line sound input, 1 W + 1 W built-in speaker, and 7 W + 7 W external speaker outputs are available.

• The white screen and screen saver functions are available to minimize phosphor burn-in.

*1 With the optionally available graphics board, you can send wide RGB signals (852 x 480) from your PC.

*2 The refresh rate of 60 Hz for XGA (1024 x 768) and those of 50, 60, 72, and 75 Hz for SVGA (800 x 600) are supported.

Note that the XGA and SVGA images will be smaller when displayed on the screen.

Содержание Plasmavision PDS4213W-H















































Результаты поиска

Содержание Plasmavision PDS4213W-H

Отзывы:

Похожие инструкции для Plasmavision PDS4213W-H

Бренды по названию

Популярные бренды

Fujitsu Plasmavision PDS4213W-H, Руководство пользователя

Результаты поиска

Содержание Plasmavision PDS4213W-H

Отзывы:

Похожие инструкции для Plasmavision PDS4213W-H

Бренды по названию

Популярные бренды