Fujitsu PG-126, Руководство пользователя

Страница: 29 / 52

1
E
1 Overview
This card is for use with the PRIMERGY (simply called "SERVER"). The card
functions as an interface between the SERVER PCI bus and SCSI devices.
This card incorporates the SCSISelect utility, which lets you easily change the card
settings.
The summarized specifications are given below:
Summarized specifications
Manufacturer's device type ＡＨＡ−２９４０Ｕ２Ｗ
Card type SCSI-3 compliance
Bus interface PCI V2.1 compliance
Data transfer system Bus master DMA
SCSI controller ＡＩＣ−７８９０
Number of SCSI channels One channel per card
Maximum transfer speed Synchronous: 80 MB/s; and asynchronous: 6 MB/s
Connector Internal SCSI 68-pin 16-bit connector (ULTRA2)
Internal SCSI 68-pin 16-bit connector (ULTRA) (not
supported)
Internal SCSI 50-pin 8-bit connector (ULTRA) (not
supported)
External SCSI 68-pin 16-bit connector (ULTRA2)
Notes
・ Since this card places a restriction on the SCSI connectors that can be
used by the SERVER, refer to the documentation for the SERVER before
connecting the SCSI connector.
・ For operating this card under the cluster configuration, use the device
driver referring to the instructions of the cluster kit.