Fujitsu MAA3182SC, Руководство OEM

Страница: 210 / 250

C141-E039-01EN 4 - 7
Table 4.2 Sense and subsense codes (2 of 7)
C * Q *
Name Explanation
Sense
key
15 01 Mechanical positioning error A seek error occurred in the drive. 1, 4
02 Positioning error detected
by read of medium
The cylinder address in the ID area did not match. 1, 4
80 Off-track detected Went off-track while it was on track. 4
81 No on track after SKC On track could not be detected after seek was
completed.
4
F0 Calibration failed Calibration was terminated with an error. 1, 4
17 01 Recovered data with retries
A data error was recovered from by reading was
retried. 1
18 00 Recovered data with ECC
applied
A data error was recovered from immediately by
ECC correction. 1
01 Recovered data with ECC
& retries applied
A data error was recovered from by ECC correction
after reading was retried. 1
02 Recovered data with ECC
and/or retries, data auto-
reallocated
A data error was recovered by ECC correction and
auto alternate block allocation was applied. 1
80 Recovered data with ECC
and/or retries, re-write
applied
A data error was recovered by ECC correction and
the same block was recovered by rewriting. 1
19 00 Defect list error
An error was detected during reading of defect
control information. 3
02 Defect list error in primary
list
An error was detected during reading of the defect
list (P List). 3
03 Defect list error in grown
list
An error was detected during reading of the defect
list (G List). 3
04 SA Control code read
error
An error was detected during reading of the SA
update control code. 3
05 Defect list error in
management list
An error was detected during reading of the defect
control table. 3
06 Cylinder skew table read
error
An error was detected during reading of the cylinder
skew table. 3
80 Log information read error An error was detected during reading of statistical
information.
3
81 Log information write
error
A write error was detected during writing of
statistical information. 3
82 Mode select SA read error An error was detected during reading of SA
information (Mode select parameter).
3
19 83 Mode select SA write error An error was detected during writing of SA
information (Mode select parameter).
3
* C: Sense Code, Q: Sub-sense Code