Fujitsu LIFEBOOK T Series, Руководство пользователя

Страница: 57 / 183

48
Problem Possible Cause Possible Solution
Infrared Problems
Infrared data
transfer is not
working. The IrDA port on the
system can’t “see” the
IrDA port on the other
device.
The system and the other
device are too far from
each other.
The viewing angle
between the devices is too
great.
You are using an old
version of IrDA.
There are possibly
problems in one or both
devices.
Move the system so that there is a direct line-
of-sight path between the two ports.
Move the system and the device so that they
are three feet or less from each other.
The viewing angle between the system port
and the device port cannot be more than 15
degrees from a center line between the IrDA
port on the Tablet PC and the IrDA port on the
other device.
The device with which you are trying to
communicate must be compliant with IrDA
standard 1.1.
Go to Start -> (All) Programs -> Accessories
-> Communications -> New Connection
Wizard. Verify that “Set up an advanced
connection” is checked and follow the on-
screen instructions.
Memory Problems
Your Power On
screen, or Info
menu of the BIOS
setup utility
information, does
not show the
correct amount of
installed memory. Your memory upgrade
module is not properly
installed.
You have a memory
failure.
Turn off your Tablet PC. Remove and re-
install your memory upgrade module.
Check for Power On Self Test (POST)
messages.
Modem Problems
Messages about
modem operation.
Modem does not
appear to work.
Messages about modem
operation are generated
by whichever modem
application is in use.
Modem may not have
been initialized.
See your application software documentation
for additional information.
Verify that the modem has been initialized by
the operating system. TO do so, right-click on
My Computer and select the Hardware tab.
Click [Device Manager] and click on the “+”
symbol that appears next to Modems. Verify
that your device is listed as installed.
LB_Soriel 07 (43-54) 26/11/04, 3:35 PM 48