Fujitsu LIFEBOOK S6120, Руководство пользователя

Страница: 40 / 130

32
L i f e B o o k S 6 0 0 0 N o t e b o o k
Power Management
Your Fujitsu LifeBook notebook has many options and
features for conserving battery power. Some of these
features are automatic and need no user intervention,
such as those for the internal modem. However, others
depend on the parameters you set to best suit your oper-
ating conditions, such as those for the display bright-
ness. Internal power management for your notebook
may be controlled from settings made in your operating
system, pre-bundled power management application, or
from settings made in BIOS setup utility.
Besides the options available for conserving battery
power, there are also some things that you can do to
prevent your battery from running down as quickly.
For example, you can create an appropriate power saving
profile, put your notebook into Suspend mode when it
is not performing an operation, and you can limit the
use of high power devices. As with all mobile, battery
powered computers, there is a trade-off between
performance and power savings.
POWER/SUSPEND/RESUME BUTTON
When your LifeBook notebook is active, the Power/
Suspend/Resume button can be used to manually put
your notebook into Suspend mode. Push the Power/
Suspend/Resume button when your notebook is active,
but not actively accessing anything, and immediately
release the button. You will hear two short beeps and
your system will enter Suspend mode.
(See figure 2-4 on
page 6 for location)
If your LifeBook is suspended, pushing the Power/
Suspend/Resume button returns your notebook to active
operation. You can tell whether the system is Suspended
by looking at the Power indicator.
(See figure 2-4 on
page 6) If the indicator is visible and not flashing, your
notebook is fully operational. If the indicator is visible
and flashing, your notebook is in Suspend mode. If the
indicator is not visible, the power is off or your notebook
is in Hibernation mode.
(See Hibernation Feature)
SUSPEND MODE
Suspend or Standby mode in Windows saves the
contents of your LifeBook notebook’s system memory
during periods of inactivity by maintaining power to
critical parts. This mode will turn off the CPU, the
display, the hard drive, and all of the other internal
components except those necessary to maintain system
memory and allow for restarting. Your notebook can be
put in Suspend mode by:
■
Pressing the Power/Suspend/Resume button when
your system is turned on.
■
Selecting Standby from the Windows Shut Down menu.
■
Timing out from lack of activity.
■ Allowing the battery to reach the Dead Battery
Warning condition.
Your notebook’s system memory typically stores the file
on which you are working, open application informa-
tion, and any other data required to support operations
in progress. When you resume operation from Suspend
mode, your notebook will return to the point where it left
off. You must use the Power/Suspend/Resume button to
resume operation, and there must be an adequate power
source available, or your notebook will not resume.
HIBERNATION (SAVE-TO-DISK) FEATURE
The Hibernation feature saves the contents of your
LifeBook notebook’s system memory to the hard drive as
a part of the Suspend/Resume mode. You can enable or
disable this feature.
Enable or Disable the Hibernation Feature
The default settings is not enabled. To enable or disable
the Hibernation feature follow these easy steps:
1. From the Start menu, select Settings , and then select
Control Panel .
P O I N T S
■ If you are running your LifeBook notebook on battery
power, be aware that the battery continues to dis-
charge while your notebook is in Suspend mode,
though not as fast as when fully operational.
■ Disabling the Power/Suspend/Resume button pre-
vents it from being used to put your LifeBook note-
book in Suspend or Hibernation (Save-to-Disk) mode.
The resume function of the button cannot be dis-
abled.
■ The Suspend or Hibernation (Save-to-Disk) mode
should not be used with certain PC Cards. Check your
PC Card documentation for more information. When
PC Cards or external devices are in use, Hibernation
(Save-to-Disk) mode cannot return to the exact state
prior to suspension, because all of the peripheral
devices will be re-initialized when the system restarts.
■
If your LifeBook notebook is actively accessing infor-
mation when you enter the Suspend or Hibernation
(Save-to-Disk) mode, changes to open files are not
lost. The files are left open and memory is kept active
during Suspend mode or the memory is transferred to
the internal hard drive during Hibernation mode.
■
The main advantage of using the Hibernation (Save-
to-Disk) function is that power is not required to
maintain your data. This is particularly important if
you will be leaving your LifeBook notebook in a sus-
pended state for a prolonged period of time. The
drawback of using Hibernation mode is that it length-
ens the power down and power up sequences and
resets peripheral devices.
S Series.book Page 32 Monday, September 15, 2003 4:48 PM