Fujitsu LIFEBOOK E546 страница 53 Скачать руководство пользователя

Страница: 53 / 111

Security functions

Removing passwords

To remove a password (without setting a new password) perform the following steps:

Password

Supervisorpassword

Userpassword

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

►

Highlight the

Set Supervisor Password

Set User Password

eld and press the Enter key.

You will be requested to enter the current password by the

Enter Current Password

prompt.

Enter New Password

will appear and you will be requested to enter a new password.

►

Press the Enter key twice at this request.

►

In the

Exit

menu, select the option

Save Changes & Exit

►

Select

Yes

and press the Enter key.

The notebook will now reboot with the password removed.
With the supervisor password, you simultaneously deactivate the user password.

Password protection for booting the operating system

With the supervisor password you have set in the

BIOS Setup Utility

(see

section

"Assigning the supervisor and user passwords", Page 50

), you can

also prevent booting of the operating system.

Operating system

Activating system protection

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

Operatingsystem

►

Select the

Password on Boot

option and press the Enter key.

►

Select the option you require (

Disabled

First Boot

Every Boot

) and press the enter key

►

Select the

Save Changes & Exit

option under

Exit

The notebook will reboot. You will be prompted to enter your password (the supervisor password).

Deactivating system protection

►

Start the

BIOS Setup Utility

and go to the

Security

menu.

Operatingsystem

►

Select the

Password on Boot

option and press the Enter key.

►

Select the

Disabled

option and press the Enter key.

If you do not want to change any other settings, you can exit

BIOS Setup Utility

►

Select the

Save Changes & Exit

option under

Exit

The notebook will reboot. The system is no longer password-protected.

Password protection for the hard disk

If a supervisor password was set, an additional password for the hard disk
can be set in the

Hard Disk Security

menu.

The hard disk is protected by this password. Data on this hard disk can then only be
read in another system if the correct password is entered.

Fujitsu

Содержание LIFEBOOK E546
















































































































Результаты поиска

Содержание LIFEBOOK E546

Отзывы:

Похожие инструкции для LIFEBOOK E546

Бренды по названию

Популярные бренды

Fujitsu LIFEBOOK E546, Руководство по эксплуатации

Результаты поиска

Содержание LIFEBOOK E546

Отзывы:

Похожие инструкции для LIFEBOOK E546

Бренды по названию

Популярные бренды