Fujitsu LIFEBOOK AH532, Руководство пользователя

Страница: 53 / 285

47 - Lithium ion Battery
Replacing the Battery
With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged.
There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps:
1
Have a charged battery ready to install.
2
Shut down your notebook and disconnect the AC adapter.
3
Turn the system over so the bottom is facing up, oriented as in Figure 23.
4
While pressing the battery lock (1), slide the battery bay release latch (2) to the right to unlatch it. Lift the battery
out of the bay (Figure 24).
5
Insert a new battery into the bay, and press it down so that the latches click into place.
6
Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
1
Plug an AC Adapter into the system and connect it to a power outlet.
2
Follow steps 3 and 4 in “Cold Swapping Batteries”.
B
E SURE TO PLUG IN AN
AC A
DAPTER PRIOR TO REMOVING THE BATTERY
. T
HERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE
THE BATTERY IS BEING REPLACED
. I
F YOU DO NOT USE AN
AC A
DAPTER YOU WILL LOSE ANY UNSAVED FILES
.
I
F THE
L
ITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED
,
YOU MAY NOT BE ABLE TO USE YOUR NOTEBOOK OR CHARGE YOUR BATTERY
.