SECTION 2
83
5.
Remove the memory.
Remove the cover of the memory slot and remove the hook on each side from the memory
module. The memory comes up slightly. Then, pull the memory diagonally up to remove it
from the slot.
6.
Install a new memory module.
Insert the memory diagonally into the slot with the notch in the memory aligned with the
projection on the connector, and then turn the memory down until it clicks into place.
7.
Close the keyboard gently.
Close the keyboard with the lugs on it aligned with the lugs on the computer main unit. At that
time, be careful that no cable gets caught between the keyboard and the computer main unit.
Keyboard
Lugs on the
keyboard
Notch in the memory
Hook
LB02_Brie (78-84)
10/17/02, 7:21 PM
83
