Fujitsu IP Centrex SRS-12i Скачать руководство пользователя страница 9

Страница: 9 / 69

1-3

Fujitsu

IP Centr

ex T

elephone

Part Names and Functions

Display

– Shows the call state, caller ID, dialed digits, network call control

messages, and elapsed time during calls. When not on a call, the date and
time of day are displayed.

Multifunction Buttons

– These buttons are assigned to call appearances or

network features or one-touch numbers. Dual assignments such as One-
Touch and Call Appearance are not supported.

Function Buttons

– Single-touch buttons for features, consisting of ADR

BOOK, CALL LOG, DROP, CONF, TRAN, REDIAL, HOLD, and SPKR.

• ADR BOOK – Allows access to store/retrieve phone numbers stored in

the telephone.

• CALL LOG – Shows lists of calls for both unanswered / answered

incoming and outgoing calls.

• DROP – Disconnects the last party added to a conference call, or

disconnects from a call when not in conference mode on some C.O.
Switches.

• CONF – Enables multiple parties (3 typically) to be on one call.

• TRAN – Places the current call on hold, selects an idle call appearance

for dialing another number so a call can be transferred.

• REDIAL – Dials the last number dialed on the phone.

• HOLD – Places existing call on hold.

• SPKR – Enables / disables the hands-free mode. When the speaker is in

use, a red indicator on the key is lit

Volume/Contrast Buttons

– Increase or decrease display contrast (when

no call is active), or speaker / handset volume (when a call is active).

Message Indicator

– A bright red indicator is lit when messages are waiting;

controlled by the network.

Numeric Keypad

– Allows the user to dial telephone numbers, and send

DTMF tones to external equipment such as voice mail systems.

MIC-OFF Button

– When pressed, the MIC-OFF key turns red and mutes the

handset and speaker MIC, this allows user to hold a private conversation.
MIC-OFF is de-activated as the default state.

Buttons

– Used for volume control, LCD contrast, and toggling

up and down the option menu.

LAN Connector

– Connector for the LAN cable.

PC Connector

– Connector for a cable to a PC.

Power Connector

– Connector for the AC Adaptor. Listed AC Adaptor marked

“Class 2” and rated 24V DC, 500mA should be used for this product.

LAN Lamp

– A green indicator is lit when the system is successfully connected.

Rear Legs

– Adjusts height of the set.

Handset/Headset Connector

– Connects the Handset/Headset cord to the

telephone.

Содержание IP Centrex SRS-12i






































































Результаты поиска

Содержание IP Centrex SRS-12i

Отзывы:

Похожие инструкции для IP Centrex SRS-12i

Бренды по названию

Популярные бренды

Fujitsu IP Centrex SRS-12i, Руководство администратора

Результаты поиска

Содержание IP Centrex SRS-12i

Отзывы:

Похожие инструкции для IP Centrex SRS-12i

Бренды по названию

Популярные бренды