- 21 -
Hardware Installation Process
English
16) BATTERY (Battery)
CAUTION
v
Danger of explosion if battery is incorrectly
replaced.
v
Replace only with the same or equivalent type
recommended by the manufacturer.
v
Dispose of used batteries according to the
manufacturer’s instructions.
+
14) IR (IR)
Ø
Please note, Be careful with the polarity of the
IR connector while you connect the IR.
Please contact your nearest dealer for optional
IR device.
VCC(+5V)
IR Data Input
GND
IR Data Output
1
15) S_IRQ (Serial IRQ Connector)
Signal
GND
Ø
This connector is for special design,
for example: PCMCIA add on card.
Ø
Be careful with the polarity of the front panel
USB connector. Check the pin assignment
while you connect the front panel USB cable.
Please contact your nearest dealer for optional
front panel USB cable.
13) F_USB1 / F_USB2 (Front USB Connector)
(F_USB1 & F_USB2 connectors in yellow are for USB 2.0)
1
USB Dy-
Power
USB Dx+
1
USB Dy+
USB Over
Current
Power
GND
GND
USB Dx-