- 34 -
GA-7VAXFS Motherboard
English
Auto
BIOS will automatically setup the port A address.
&
&
&
&
&
Onboard Serial Port 2
Disabled
Disable onboard Serial port B. (Default Value)
3F8/IRQ4
Enable onboard Serial port B and using daddress 3F8 , IRQ4.
2F8/IRQ3
Enable onboard Serial port B and using daddress 2F8 , IRQ3.
3E8/IRQ4
Enable onboard Serial port B and using daddress 3E8 , IRQ4.
2E8/IRQ3
Enable onboard Serial port B and using daddress 2E8 , IRQ3.
Auto
BIOS will automatically setup the port B address.
&
&
&
&
&
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal
Set onboard I/O chip UART to Normal Mode. (Default Value)
IrDA
Set onboard I/O chip UART to IrDA Mode.
ASKIR
Set onboard I/O chip UART to ASKIR Mode.
SCR
Set onboard I/O chip UART to SCR Mode.
&
&
&
&
&
UR2 Duplex Mode
# This item will be available when "UART Mode Select" set at "IrDA" or "ASKIR" mode.
Full
IR Function Duplex Full.
Half
IR Function Duplex Half. (Default Value)
&
&
&
&
&
OnBoard Parallel Port
This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
Disabled
Disable onboard Parallel port.
378/IRQ7
Enable onboard LPT port and set address at 378, using IRQ7. (Default Value)
278/IRQ5
Enable onboard LPT port and set address at 278, using IRQ5.
3BC/IRQ7
Enable onboard LPT port and set address at 3BC, using IRQ7.
&
&
&
&
&
Parallel Port Mode
This feature allows you to connect with an advanced printer via the port mode it supports.
SPP
Using LPT port as Standard Parallel Port.
EPP
Using Parallel port as Enhanced Parallel Port. (Default Value)
ECP
Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.