- 28 -
GA-7VAXFS Motherboard
English
&
&
&
&
&
Floppy 3 Mode Support (for Japan Area)
Disabled
Normal Floppy Drive. (Default value)
Drive A
Drive A is 3 mode Floppy Drive.
Drive B
Drive B is 3 mode Floppy Drive.
Both
Drive A & B are 3 mode Floppy Drives.
&
&
&
&
&
Halt on
The category determines whether the computer will stop if an error is detected during power up.
All Errors
Whenever the BIOS detects a non-fatal error the system will be stopped.
NO Errors
The system boot will not stop for any error that may be detected and you
will be prompted. (Default value)
All, But Keyboard
The system boot will not stop for a keyboard error; it will stop for all
other errors.
All, But Diskette
The system boot will not stop for a disk error; it will stop for
all other errors.
All, But Disk/Key
The system boot will not stop for a keyboard or disk error; it will stop for
all other errors.
&
&
&
&
&
Memory
The category is display-only which is determined by POST (Power On Self Test) of the BIOS.
-- Base Memory
The POST of the BIOS will determine the amount of base (or conventional) memory installed
in the system.
The value of the base memory is typically 512 K for systems with 512 K memory installed on
the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard.
-- Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1 MB in the CPU’s memory address map.