Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm Ccd/scsi, Руководство оператора

Страница: 93 / 121

3. Setting IPC pre-set mode
When you set the use of the IPC pre-set mode, you must set it as follows:
1 Press “Next” or “Previous” and let
the scanner display Screen 43.
<Screen 43>
2 At Screen 43, press or to select the
pre-Setting and press to activate
the pre-setting. Then the scanner displays
Screen 43-1.
NOTICES
The following 2PC pre-settings can be selected when 2PC-4D is installed:
• Preset 1: Captures texts printed on the colored background
• Preset 2: Produces an image with good contrast
• Preset 3: OCR Smoothing
• Preset 4: Image Smoothing
• Preset 5: Dither
The following built-in IPC pre-settings can be selected even though IPC-4D is not installed:
• Sharpen
• Darken Character
• Copy Quality
<Screen 43-1>
3 At Screen 43-1, select “Yes” or “No”. Note
that when you select “Yes”, the IPC
setting from the Host computer is ignored.
If you select “No”, the IPC setting will be
changed according to the host setting.
Finally press
.
When you select the Copy Quality, select the scanner and printer settings carefully to get the best
quality.
NOTICE