Fujitsu ETERNUS LT270 S2, Руководство пользователя - Управление панелью

Страница: 126 / 168

Chapter 3 Remote Panel Operation
3.11 Setting Library Information
FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation-
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0
126
2
Set each item.
Table 3.34 SNMP agent setting items
Display item Explanation
Community Up to five communities set by the SNMP manager can be registered. Though up
to 64 characters can be entered in each text area, only one community can be set
in one text area. Characters that can be entered are alphanumeric characters and
symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}). To remove a setup community
already set, delete the relevant community.
User Name Up to five user names set by the SNMP manager can be registered. Though up to
64 characters can be entered in each text area, only one user name can be set in
one text area. Characters that can be entered are alphanumeric characters and
symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}). To remove a setup community
already set, delete the relevant user name. This item is available if "v3" is speci-
fied for "SNMP Version".
Authentication Specify whether authentication is enabled or disabled.
If authentication is enabled, access to the SNMP without the specified authenti-
cation method and password is not permitted.
Authentication Mode Specify the authentication method.
Either "SHA" or "MD5" can be selected as the authentication method.
Authentication Password Register a password for authentication.
From 8 to 32 characters can be entered.
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Authentication Password
(Retype) Enter the password for authentication again.
From 8 to 32 characters can be entered.
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Encryption Specify whether encryption is enabled or disabled.
If encryption is enabled, data is encrypted by the specified encryption method
and password.
Encryption Mode Specify the encryption method.
Either "AES" or "DES" can be selected as the encryption method.
Encryption Password Register a password for encryption.
From 8 to 32 characters can be entered.
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Encryption Password
(Retype) Enter the password for encryption again.
From 8 to 32 characters can be entered.
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Destination IP Address Traps will be sent to the IP address specified here.
The IP address can be entered in the text field in either of the following three for-
mats:
•
IPv4 format
Only numeric characters ranging from 0 to 255 can be entered in each text
area of this item.
•
IPv6 format
Alphanumeric characters can be entered.
•
DNS format
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).