Fujitsu Eternus DX80 S2, Руководство пользователя

Страница: 169 / 186

Appendix B Audit Log List
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Operation-
Copyright 2013 FUJITSU LIMITED P3AM-4842-12ENZ0
169
02080008 Delete Snap Data Pool Volume The SDPV is deleted.
$a
: SDPV number
$b : Mode (Force, Reservation)
[No=
$a
Mode=
$b
]
02080009 Start Advanced Copy The is started.
$a : Type ()
$b
: Copy source volume number
$c : Copy destination volume number
[Type= $a Source_No= $b Destination_No= $c ]
0208000A Delete Advanced Copy The copy session is stopped.
$a : Session ID
$b
: Deletion mode (Force, Normal)
[ID= $a Mode= $b ]
0208000B Set Host Port Mode The port mode for the host interface port is
changed.
$a : Port number (example: 001 or "All")
$b
: Port mode after changing (CA, RA,
Initiator, CA/RA, CH, CU)
[Port=
$a
Mode=
$b
]
0208000C Modify REC path The REC copy path information is set, imported, or
deleted.
Detail information is not displayed.
0208000D Set REC Round Trip Time The round trip time for the REC is set.
$a : Box ID for the remote device
$b
: Round trip time for the REC [msec] (1 –
65535)
[Box_ID= $a Time= $b ]
0208000E Set REC Multiplicity The REC multiplicity is set.
$a : Box ID for the remote device
$b
: REC Multiplicity (1 - 1024, Auto)
$c : Priority level (1 - 8, Auto)
$d
: Copy schedule mode (Session Balancing,
Dst RG Balancing)
[Box_ID= $a Multiplicity= $b Priority_Level= $c
Sch_Mode=
$d
]
0208000F Set REC Buffer The REC Buffer is set.
$a : Group number (REC Buffer number)
$b
: Volume type (Open)
$c
: Box ID for the remote device
$d
: REC Buffer size [MB]
$e : Buffer type (Receive, Send)
$f
: Forwarding Interval [sec]
$g : HALT Wait Timer [sec] (0, 5, 10, 15)
$h
: Monitoring Time [sec] (0 – 15)
$i
: I/O Priority Mode (Enable, Disable)
$j
: HALT Priority Mode (Enable, Disable)
[No=
$a
Vol_Type=
$b
Box_ID=
$c
Size=
$d
Type=
$e
Interval=
$f
Wait_Timer=
$g
Monitor=
$h
IO_Response_Priority= $i HALT_Priority= $j ]
02080010 Delete REC Buffer The REC Buffer is deleted.
$a
: Group number (REC Buffer number)
[No=
$a
]
02080011 Create REC Disk Buffer The REC Disk Buffer is created.
$a
: RAID group number
$b
: RAID group name
$c
: Drive (DE-ID + Slot number (example:
0000, 0001, 0002))
$d
: Assigned CM (0, 1)
$e : Encryption by CM (Enable, Disable)
$f
: Stripe Depth (64KB, 128KB, 256KB, 512KB,
1024KB)
[No=
$a
Name=
$b
Disk=
$c
CM=
$d
Encryption=
$e
Stripe_Depth= $f ]
Event code
Upper: Message
Description
Lower: Detailed information