Fujitsu ESPRIMO X956, Руководство по эксплуатации

Страница: 23 / 61

Getting started
Setting up the device
Workstation Ergonomic Device
When installing your device, please read the recommendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different
fi nishes and varnishes used on furniture, it is possible
that the rubber feet will mark the surface they stand on.
Depending on the location of your device, bothersome vibrations and noises may
occur. To prevent this, a distance of at least 10 mm / 0.39" should be maintained
from other devices on casing sides without ventilation surfaces.
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
A minimum distance of 200 mm / 7.87" from the device must be
observed for ventilation areas.
Do not expose the device to extreme ambient conditions (see "Technical data", Page 54 ,
section "Ambient conditions"). Protect the device against dust, humidity and heat.
When the lighting conditions are unfavourable (for instance direct sunlight), re fl ections
may occur which can cause the displayed characters to be dif fi cult to read. Suitable
ambient lighting is necessary to avoid these kinds of re fl ections.
In addition, align your system according to the ambient lighting conditions, for instance
by changing the position of the display (horizontal or vertical angle).
Setting up an ergonomic video workstation
1
► Do not position the video workstation
opposite a window (1).
Fujitsu 19