Fujitsu ESPRIMO P15 Series Скачать руководство пользователя

Страница: 46 / 52

System expansions

Installing and removing the hard disk drive

Harddiskdrive,

Removing a hard disk drive

►

Open the casing (see

"Opening the casing", Page 32

Harddisk drive,

►

Remove all connected cables (data cable, power supply) from the drive.

►

Undo the screws (1) and gently press against the hard disk drive from underneath.

►

Pull the drive backwards a short way out of the bay in the direction of the arrow (2).

The drive now protrudes slightly out of the bay.

►

Pull the drive completely out of its bay. Make sure that you are not touching other components.

►

If necessary, make the required settings on the remaining hard disk drive.

►

Close the casing (see

"Closing the casing", Page 33

It may be necessary to modify the entry for the remaining drives in the

BIOS Setup

You will need a SATA cable to install a second hard disk on the listed device variants.
An additional power supply cable is necessary for the ESPRIMO P2440,
ESPRIMO P2540 and ESPRIMO P2550 device variants.

Fujitsu Technology Solutions

Содержание ESPRIMO P15 Series





















































Результаты поиска

Содержание ESPRIMO P15 Series

Отзывы:

Похожие инструкции для ESPRIMO P15 Series

Бренды по названию

Популярные бренды

Fujitsu ESPRIMO P15 Series, Руководство по эксплуатации

Результаты поиска

Содержание ESPRIMO P15 Series

Отзывы:

Похожие инструкции для ESPRIMO P15 Series

Бренды по названию

Популярные бренды