Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order described below.
Connecting the cables
►
Turn off all power and equipment switches.
Cord
Cable,
►
Remove all power plugs from the grounded mains outlets.
►
Connect all the cables to the device and the external devices. Please make sure that you
always observe the safety notes provided in
"Important notes", Page 7
.
►
Plug all data communication cables into the appropriate sockets.
►
Plug all power cables into the grounded mains outlets.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in
"Connecting external devices to the USB
ports", Page 16
and in the documentation for the USB devices.
Disconnecting the cables
►
Switch off all affected devices.
Cable,
►
Remove all power plugs from the grounded mains outlets.
►
Unplug all data communication cables from the appropriate sockets.
►
Disconnect all of the cables from the device and from the external devices.
Fujitsu Technology Solutions
13
