Fujitsu ESPRIMO G558, Руководство по эксплуатации

Страница: 12 / 38

Important notes
Power cable and mains adapter:
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
The mains adapter’s power cable should only be connected to a mains
socket if the device is connected.
Do not use the mains adapter for other devices.
Only use the power adapter provided for the device, see chapter
"Technical data ", Page 31 .
Optionally, you can operate the system without the power adapter via the Fujitsu
P24-9 TE monitor and a USB-C cable, see chapter
"Important notes for operating
your device via USB Power Delivery (USB-PD)", Page 9 .
Make sure that the rated current of the mains adapter is not higher than that of
the power system to which you connect the mains adapter.
ON/OFF switches do not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.
Transporting the device
Device Transportation Re-transportation
Transport all devices separately in their original packaging or in a packaging
that protects them from knocks and jolts.
Unpack them only at the installation site.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. In order to avoid damage to the device, wait before preparing
it for use until the device has reached the ambient temperature and it is absolutely dry.
Cleaning the device
Device, Transportation Retransportation Systemunit,see Device
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
8 Fujitsu