Fujitsu DL3100, Руководство пользователя

Страница: 178 / 230

FUJITSU DL3100
C-38
User’s Manual
Function Command
Setting the units
Set Vertical Units
ESC [ \ 4 0 0 0
(n1) (n2)
The digits 4 0 0 0 (decimal), 04 00 00 00
(hexadecimal) are constants.
This command lets you set the size of the increments
for the following commands:
• Set Line Spacing for Graphics (ESC 3)
• Move Paper Vertically (ESC J).
n1(Hex) n2(Hex) Unit
D8H 00H 1/216 inch
B4H 00H 1/180 inch
68H 01H 1/360 inch
Select 1/8 inch line spacing
ESC 0
Select 7/72 inch line spacing
ESC 1
Select 1/6 inch line spacing ESC 2
Set n/216 or n/180 inch line spacing
ESC 3 (n)
This command sets line spacing to n/216(AGM=No)
or n/180(AGM=Yes) inches. It does not cause the
form to move. It changes the vertical distance moved
when a line feed command is received.
Set n/72 or n/60-inch line spacing
ESC A (n)
This command sets line spacing in n/72 inch
(AGM=No) or n/60 inch(AGM=Yes) increments. To
activate the line spacing, use the printer command
Activate Line Spacing for Text (ESC 2).
Set horizontal tabs ESC D n1....nk
NULL
This command sets up to 28 tabulation stops to be
used with the printer command HT, Horizontal
Tabulation.
n1.....n28 is used to set the tabulator stop positions.
• ESC D is terminated by a 0 entry.
• The first tabulation stop is at the leftmost column.
• Input the tabulation stops (n1.....n28) in ascending
numerical order
• The printer command ESC R resets to the default
horizontal tabulation stops, which are set at every
eight positions beginning at column 9 (9, 17,25,
and so on).
• The printer command HT, Horizontal Tabulation,
activates the tabulationstops set by this printer
command.
(1≤n≤255, 1≤k≤28)