Fujitsu DL3100, Руководство пользователя

Страница: 177 / 230

FUJITSU DL3100
User’s Manual
C-37
Function Command
• If bits 1 and 2 of n4 are 00 and bit 8 is set to 0 the
bytes that make up the character definition define
rows 2 to 9 of the grid, the most significant bit
representing the second dot, and the least significant
bit representing the ninth dot down. Simply set a bit
to 1 to print a dot in that position on the grid, or to 0
to print white space.
• If bits 1 and 2 of n4 are 01 the least significant bit of
each data byte is replicated in rows 9 to 12 of the
grid.
• If bits 1 and 2 of n4 are 10 the bits 1 to 4 of each
data byte are replicated in rows 9 to 12 of the grid.
• Bits 5 to 7 of n5 specify the number of columns left
blank to the left of the defined character in
proportional spacing mode. Up to seven columns
can be skipped.
• Bits 1 to 4 of n5 specify the width in columns of the
defined character in proportional spacing mode.Up
to fifteen columns can be used to define the
character.
• Downloaded characters are selected using the Esc I
command and then printed by sending the
appropriate character codes.
Select Code Page ESC [ T 4 0 0
0 (cH) (cL)
The digits 4 0 0 0 (decimal), 04 00 00 00
(hexadecimal) are constants.
See below table for the value of cH and cL
Decimal Hex
CodePage cH cL cH cL
437 1 181 01H B5H
737 2 225 02H E1H
ISO_8859_7 3 45 03H 2DH
ISO_8859_1 3 51 03H 33H
850 3 82 03H 52H
851 3 83 03H 53H
852 3 84 03H 54H
857 3 89 03H 59H
858 3 90 03H 5AH
860 3 92 03H 5CH
861 3 93 03H 5DH
863 3 95 03H 5FH
864 3 96 03H 60H
865 3 97 03H 61H
866 3 98 03H 62H
869 3 101 03H 65H
USSR 42 114 2AH 72H