Fujitsu DL3100, Руководство пользователя

Страница: 126 / 230

FUJITSU DL3100
8-6
User’s Manual
Operating Problems and Solutions
Table 8.3 identifies common operating problems and
suggests solutions.
If you cannot resolve a problem, contact your dealer.
Table 8.3 Operating Problems and Solutions
Problem Solution
The power does not turn on.

Check whether the mains voltage is
correct.

Make sure that the power cord is
securely connected to both the
printer and the mains power outlet.

Make sure that the power outlet is
functional. If not so, use other outlet.

Turn the power off. Wait a minute
and then turn the printer on again. If
the printer still has no power, contact
your dealer.
The printer is on but it will not
print.

Verify the printer Online light
condition; If the Online light goes
out, the printer is offline.Press the
Online key can change to Online
state.

If you use the interface cable, make
sure it is securely connected to both
the printer and the computer.

Make sure paper is loaded.

Run the printer Status Page. If
printing executes normally, the
problem is caused by: the interface,
the computer, incorrect printer
settings, or incorrect software
settings.

Make sure that the printer driver
selected in your software is the same
as the emulation selected on the
printer.
Paper select lever error

If paper is loaded and the paper
select lever is moved to the incorrect
position, the printer turns offline,
and the buzzer sounds continuously.
Switch the paper select lever back to
its correct position.