Fujitsu CELSIUS W520 Скачать руководство пользователя страница 33

Страница: 33 / 69

Troubleshooting and tips

The device cannot be switched off with the ON/OFF switch.

Cause

Remedy

System crash

►

Keep the on/off switch pressed for at least 4
seconds until the machine switches off.

Caution: This can lead to a loss of data!

This procedure does not allow the operating
system to shut down in an orderly way. The next
time the system is started there may well be
error messages.

Monitor remains blank

Cause

Remedy

Monitor is switched off.

►

Switch your monitor on.

Brightness control is set to dark

►

Adjust the brightness control. For detailed
information, please refer to the operating
manual supplied with your monitor.

Power cable not connected

►

Switch off the monitor and the device.

►

Check that the monitor power cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.

►

Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.

►

Switch on the monitor and the device.

Monitor cable not connected

►

Switch off the monitor and the device.

►

Check that the monitor cable is properly
connected to the device and monitor.

►

Switch on the monitor and the device.

Wrong monitor has been set under Window XP

►

Restart the device.

►

Press

while the system is booting.

Either the

Windows Advanced Start Options

or the menu for selecting the operating system
appears.

►

If the menu for selecting the operating
system appears, press

►

Select

Safe Mode

Safe Mode with Network

►

Go to

Start – Settings – Control Panel – Display

and the tabs

Appearance

Themes

Settings

to set the correct values for the connected
monitor as described in the operating
manual of the monitor.

Fujitsu Technology Solutions

Содержание CELSIUS W520






































































Результаты поиска

Содержание CELSIUS W520

Отзывы:

Похожие инструкции для CELSIUS W520

Бренды по названию

Популярные бренды

Fujitsu CELSIUS W520, Руководство по эксплуатации

Результаты поиска

Содержание CELSIUS W520

Отзывы:

Похожие инструкции для CELSIUS W520

Бренды по названию

Популярные бренды