Fujitsu CELSIUS W520 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 69

background image

Getting started

Connecting external devices to the parallel
(optional) or serial port

Parallelport

Serialport

Parallelport

Serialport

Externaldevices

Devices

External devices can be connected to the parallel or serial port (e.g. a printer or a modem).

►

Connect the data cable to the external device.

►

Depending on the device, connect the data cable to the parallel port or the serial port.

For an exact description of how to connect external devices to the corresponding
port, please refer to the documentation of the external device.

Port settings

Parallelport

Serialport,

You can change the port settings (e.g. address, interrupt) in the

BIOS Setup

.

Device drivers

Device drivers

Device drivers,

The devices connected to the parallel or serial port require drivers. Your operating
system already includes many drivers. If the required drive is missing, install it. Current
drivers are usually available on the Internet or will be supplied on a data carrier.

Connecting external devices to the USB ports

USBdevices,

USBport,

Externaldevices,

Devices,

You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).

USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.

Additional information can be found in the documentation for the USB devices.

►

Connect the data cable to the external device.

►

Connect the data cable to one of the USB ports on your device.

Device drivers

The external USB devices you connect to the USB ports usually require no
driver of their own, as the required software is already included in the operating
system. However, if the external USB device requires its own software, please
install it from the data carrier provided with the USB device.

To ensure the transmission capacity of USB 2.0, the cable from the external USB
device to the USB port of your device must not be longer than 3 m.

Fujitsu Technology Solutions

19

«
...
21
22
23
24
25
...
»

Содержание CELSIUS W520






































































Отзывы:

Нет отзывов

Похожие инструкции для CELSIUS W520

Бренд: Barco Страницы: 2

Бренд: Compal Страницы: 57

ARK-3531 Series

Бренд: Advantech Страницы: 84

Бренд: Antec Страницы: 10

320-00-00010-01

Бренд: Life Fitness Страницы: 36

Бренд: Acer Страницы: 47

Бренд: BTOD Страницы: 12

Бренд: MSI Страницы: 53

RS700-E6 - 1U Rm Bb Tylesburg 36D Xeon-dp 4XSATA Hot-swap

Бренд: Asus Страницы: 20

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 50

Бренд: Asus Страницы: 104

Бренд: Asus Страницы: 94

Бренд: Asus Страницы: 98

Бренд: Asus Страницы: 96

Бренд: Asus Страницы: 56

Terminator P4 533A

Бренд: Asus Страницы: 100

Бренд: Asus Страницы: 108

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды