Fujitsu BS2000, Руководство пользователя

Страница: 330 / 374

Alarm management Managing logging functions
328
U41855-J-Z125-3-76
A message via e-mail has the following properties:
– Subject:
SE server alarm management notification (<weight>)
– The content of the mail shows the event or a list of the events of the last minute in the
following format:
<timestamp>;<weight>;<management-unit>;<component>;<message>
For a list of possible events, see Further information
→
Events in the online help.
The following functions are available in the Alarm management tab:
Add a new SNMP trap receiver:
Ê
In the SNMP trap receiver group, click the Add new trap receiver tab and in the subsequent
dialog, enter the required information for the trap receiver. Define a threshold weight,
starting from which messages should be triggered, and confirm the action.
Change the properties of an SNMP trap receiver
Ê
In the SNMP trap receiver group click the Change icon by the required receiver. Modify
the weight and confirm the action.
Remove an SNMP trap receiver from the list
Ê
In the SNMP trap receiver group click the Delete icon by the required receiver and confirm
the action.
Test the messages for an SNMP trap receiver
You can send a test trap to a receiver. If the test trap is successfully received, the properties
of the receiver are ok.
Ê
In the SNMP trap receiver group click the Test icon by the required receiver and confirm
the action.
Create mail configuration
For messaging via e-mail, you need an SMTP server that sends the e-mails. There should
also be a return address entered in the sent e-mails. If there is no e-mail configuration
configured yet, proceed as follows:
Ê
In the mail configuration group, click the Create mail configuration button and in the
subsequent dialog, enter the required information. Then confirm the action.
Change mail configuration
If you want to change the data of an existing e-mail configuration, proceed as follows: