Fujitsu AIRSTAGE UTY-ASGXZ1, Руководство по эксплуатации

Страница: 47 / 141

4.
Data acquisition application right click menu
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved. ((
OK button
The set contents are saved and the screen is closed.
Cancel button
Environment setting stops and the screen closes.
Apply button
The set contents are saved.
Show also the capacity setting of the unit.
Simultaneously shows the capacity value set by PCB of each indoor unit and outdoor
unit at the capacity display field on each screen. When displayed, it is displayed by
{capacity value} to distinguish it from the capacity specified by each model.
However, when the unit different from outdoor unit destination is specified, “ - ” is dis -
played and the value may not be displayed.
• This set value is used for switching the capacity of air conditioning con-
trol. Since the set value may not correspond to the capacity specified by
each model, use it only as a guide. (Slight deviation due to destination
differences and setting mistakes at PCB replacement, etc.)
“kW” of outdoor unit is not displayed because this function is not sup-
•
ported.
S and V series indoor unit and outdoor unit are not displayed.
•
Note
After changing the display settings, the changes will take effect only from the
Monitor application newly started from the Menu screen.
In order for the changes to take effect, re-display the Monitor application from the
Menu Screen (Refer to “par. (-2 Main menu”).
Note