Fujitsu AIRSTAGE UTY-ASGXZ1, Руководство по эксплуатации

Страница: 18 / 141

3.
Data
∙acquisition
∙application
∙starting
∙flow
16 Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Name∙Master∙Database∙file∙(.CSV)∙preparation∙
„ „
The address, name, and other information which becomes the comparison source during
scanning are saved beforehand in CSV format.
Since the template [SystemListTemplate.xls] is
C:\Program Files\AIRSTAGE-Service Tool\SystemListTemplate\, open that file
with Excel.
(*1) (*2)
Since the following screen is displayed, set a value at each item.
Input contents
Adaptor No. Enter the Adaptor No. (Range: 1 ~ ()
Refrigerant Enter the refrigerant circuit address (Range: 0 ~ 99)
Unit
Input “Model” numerically Enter the unit model. (Inner: 1, Outer: 2)
Input Unit Address
Enter the unit No.
(When “1” is inputted in “Model” field, input within the 0 ~ 3 range.
When “2” is inputted in “Model” field, input within the 0 ~ 63
range.)
Name
Enter a name which allows easy classification of units. When a
name is entered in this field, it is displayed on the Service Tool.
Entry is not always necessary.
When nothing is entered, the name is displayed as a blank.
Only alpha-numeric characters and spaces may be used for the
unit name.
Model Name
Enter a correct model name for each unit, using alphanumeric
characters, “-” and “#”. If the model name is unknown, keep the
cell blank.
R.B. Unit Model Name
Enter the model name of the R.B. unit connected to each indoor
unit using alphanumeric characters, “-” and “#”. If the model
name is unknown, keep the cell blank.