Fujitsu AIRSTAGE UTY-ASGXZ1, Руководство по эксплуатации

Страница: 20 / 141

3.
Data
∙acquisition
∙application
∙starting
∙flow
18 Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Scanning Setting 3-2-5
Scanning Setting screen
„ „
The air conditioner indoor units and outdoor units are connected by a transmission bus line
and each have unique address information. Scanning collects this information.
Transmission adaptor entry field
The name of the transmission adaptor displayed on the screen can be entered. The
default is “Adaptor1”. When unnecessary, it can remain as is. Only alpha-numeric char-
acters and spaces may be used for the transmission adaptor name (up to 10 alphanu-
merics and spaces).
USB port selection field
Select the USB port which connects the transmission adaptor.
Scan execution setting check
Check to execute scanning.
Do not check when using existing site data which is currently being read. (*1)
Ref. No. range (ALL) check
Check to scan all the refrigerant circuits.
At this time, the range of refrigerant circuit addresses to be scanned is automatically
set to 00 ~ 99.
Ref. No. check
Check to execute the setting of .
Ref. No. range input field
When Ref. No. is checked at step , input the refrigerant circuit addresses to be
scanned within the 00 ~ 99 range.
Input the start refrigerant circuit address ~ end refrigerant circuit address range.
Checked address
When this radio button is selected, only addresses confirmed by the address checker
are scanned.