En-13
Cable tie
(Small)
1. Red
2. White
3. Black
CAUTION
When connecting the
remote controller wires, do
not overtighten the screws.
Hole
[Example]
Remote
controller cable
Box
Screws
Connector
Rear case
4-3/4 (120)
11/16
(17)
4-3/4 (120)
1-3/16
(30)
Hole
1-5/16
(33.5)
7/8
(23)
5/16
(8)
3/16 (4.5)
5/8
(15.3)
2-1/2 (63.5)
3-5/16 (83.5)
1/2
(12.5)
1-13/16
(45.3)
3/16 (4.5)
3/16
(4.5)
Hole
3
Hole
2
1/4
(6)
Unit: in. (mm)
CAUTION
Install the remote controller wires so as not to be touched
directly with your hand.
Do not touch the remote controller PC board and PC
board parts directly with your hands.
8.2. Setting the DIP switches
Set the remote controller DIP switches.
[Example]
1
2
3
4
5
6
DIP switch 1
Front case (back side)
OFF
ON
ON
(
★
Factory setting)
NO.
SW state
Detail
OFF
ON
DIP-
switch 1
SW 1
★
Cannot be used.
(Do not change)
SW 2
★
Dual remote controller setting
* Refer to “DUAL REMOTE
CONTROLLERS” in “10.
SPECIAL INSTALLATION
METHODS”.
SW 3
★
Use prohibited.
(Do not change)
SW 4
★
Use prohibited.
(Do not change)
SW 5
★
Use prohibited.
(Do not change)
SW 6
★
Invalidity Validity
Memory backup setting
* Set to ON to use batteries
for the memory backup. If
batteries are not used, all
of the settings stored in
memory will be deleted if
there is a power failure.
.
9. CASSETTE GRILLE INSTALLATION
9.1. Remove the intake grille
(1) Slide the 2 grille hooks.
Grille hook
(2) Open the intake grille and remove.
9374318599-02_IM.indb 13
9374318599-02_IM.indb 13
9/26/2018 11:04:20 AM
9/26/2018 11:04:20 AM
