Fujitsu AB* A12GATH, Дизайн и техническое руководство

Страница: 971 / 1124

„
●
When electricity meter is connected
At electricity apportionment, the DX-Kit itself and units [A] and [B] mentioned above can be
handled the same as when an electricity meter is not connected. Set the electricity value at
ON beforehand for the units [A] and [B] from the “Parameter Setting” screen and install the
electricity meter so that the units [A] and [B] are included. The input value in the calculation as
a constant value when the external output value is ON is included.
Whm
DX-Kit
[B] External fan
[A] Run/stop state
External output linked units
Whm
Whm
DX-Kit
[B] External fan
[A] Run/stop state
External output
linked units
The electricity meter is installed so that the
units [A] and [B] are included.
The electricity meter is installed
independently from the units [A] and [B].
If there is a unit related to the DX-Kit other than [A] and [B], if the DX-Kit is connected as an
independent electricity meter system and installed so that other units are included, it may be
included in electricity charge apportionment. (All the value of that electricity meter is charged
to the DX-Kit.)
Whm
Whm
DX-Kit
[B] External fan
[A] Run/stop state
External output linked units
DDC/Damper/Heater, etc.
The electricity meter is installed so that [A],
[B], and other units are included.
Units other than [A] and [B] must not be connected to an electricity meter together with other
indoor units. If connected, the electricity amount of DDC, damper and heater is also charged
to the other indoor units.
Whm
DX-Kit
[B] External fan
[A] Run/stop state
External output linked units
DDC/Damper/Heater, etc.
The electricity meter is installed so that the
units other than [A], [B] and indoor units
are included.
- (07-190) -
F
UN
C
TI
O
N
SE
T
TI
N
G
F
UN
C
TI
O
N
SE
T
TI
N
G