Fujitsu Siemens Computers STYLISTIC ST41 Series, Руководство пользователя

Страница: 34 / 71

Using the Tablet PC
28 - English
A26391-K129-Z121-1-7619
Replacing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.
A damaged or worn tip may not move freely, causing unpredictable results when using the pen.
If your pen exhibits these problems, you should replace the pen tip. To do so, use the pen tip
removal tool included with your pen.
Pen tips are available as an accessory from your authorised dealer.
1
Pen tip removing tool
1 = Gap
Ê
To remove the tip; position the tip in the gap between the two ends of the tool.
Ê
Pinch the tool together so that the tip is firmly clasped, then pull it from the barrel.
Ê
To replace the tip, retrieve one of the new tips that accompanied your pen.
Insert the flat end of the tip into the barrel and push it in firmly until it is seated.
i
If the tip is worn or damaged, discard it.
Charging the battery
The Tablet PC battery can be charged while it is installed in the Tablet PC.
To do so:
Ê
Connect a power source, such as the power adapter on the Tablet PC.
The DC Input icon appears in the Status display.
If the battery charge is below 90%, the battery begins charging. The Charging icon appears in the
Status display.
If the battery charge is 90% or higher when you connect DC power, the battery will not charge. This
prevents the battery from being overcharged.
Look at the Battery Gauge icon in the Status display to determine the percent of charge in the
battery. See the "Status display" section in the "Getting started" chapter for a description of the
Battery Gauge icon.
As long as the power source remains connected to the Tablet PC, the charging process continues
until the battery charge reaches 100%.
Further information about the battery charging time can be found in chapter "Technical data".
Also note the following with respect to charging the battery:
•
You can use the system, suspend system operation, or shut down and turn off the system
without interrupting the charging process. However, using the system while the battery is
charging will cause the battery to charge at a slower rate.