Fujitsu Siemens Computers SCENIC S 2, Руководство по эксплуатации, Страница: 13 / 72

Cleaning the PC Important notes
A26361-K650-Z100-1-7619
5
Cleaning the PC
!
Turn off all power and equipment switches and remove the power plug from the mains
supply.
Do not clean any interior parts yourself, leave this job to a service technician.
To avoid damaging the casing, do not use any abrasive powder, or other cleaning agents
that damage plastic.
Ensure that no liquid enters the system (danger of short circuit).
In order to avoid overheating, ensure that the monitor and PC ventilation outlets are not
obstructed.
Cleaning the PC and the monitor
Wipe the casing of the device and monitor with a dry cloth. If particularly dirty, use a cloth that has
been moistened in mild domestic detergent and then carefully wrung out.
Cleaning the keyboard and the mouse
Use disinfectant wipes to clean the keyboard and the mouse.
The mouse mechanism and the mouse ball can be cleaned by removing the retaining ring on the
underside of the mouse.
Ê Using two fingers push the retaining ring and turn the ring in the direction of the arrows.
Ê
Remove the retaining ring and the rotating ball.
Ê
Clean the ball and the three small wheels in the mouse with a lint-free cloth.
Ê
Replace the ball and the retaining ring.
Ê
Using two fingers, push the retaining ring and turn the ring in the opposite direction of the
arrows. You should feel the ring engage.