Fujitsu Siemens Computers LIFEBOOK B Series, Руководство по эксплуатации, Страница: 61 / 75

A26391-K105-Z120-1-7619
53
Settings in BIOS Setup
In BIOS Setup you can set the system functions and the hardware configuration of the notebook. The
mouse will not function in
BIOS Setup
; you must use the keyboard.
When it is supplied, the notebook is set to factory default settings. You can change these settings in
BIOS Setup
. Any changes you make take effect as soon as you save and quit the
BIOS Setup
.
The
BIOS Setup
programme contains the following menus:
•
Main
: for system settings as time, date, hard disk and monitor selection
•
Advanced : for system settings such as interfaces and keyboard, audio and video
functions
•
Security : for password settings and safety functions
•
Power saving : for setting up the energy saving functions
•
Boot
: for configuring the boot sequence
•
Exit
: Exiting
BIOS Setup
Start BIOS Setup
Ê
Restart the notebook (switching On/Off or warm boot).
Ê
When the message Press F2 to enter Setup appears, press the key [F2] [F2] [F2] [F2] .
i
If a password has been assigned:
Ê Enter the password and press the Enter key.
Ê
If you have forgotten the password, contact your system administrator or contact our
customer service centre.
Operating BIOS Setup
Ê
Use the cursor key
å
å å
å
or
ç
ç ç
ç
to select the menu you wish to access to make changes.
Ê
Press the Enter key.
The menu is displayed on the screen.
Ê Use the cursor key æ
æ æ
æ or è
è è
è to select the field you wish to change.
Ê Press the space bar to confirm your selection.
Ê
Press the [ESC]
[ESC] [ESC]
[ESC] key to exit the selected menu.
Ê
Press the [F1]
[F1] [F1]
[F1] key to display help on the operation of
BIOS Setup
.
Ê
Make a note of the changes you have made (here in this manual, for example).
Ê
Using the [F9] [F9] [F9] [F9] function key, you can load the default settings for the
BIOS Setup
menu you are
currently in.