Fujitsu Siemens Computers LIFEBOOK B Series, Руководство по эксплуатации, Страница: 33 / 75

Touchpanel Working with your notebook
A26391-K105-Z120-1-7619
25
Touchpanel
Using the Touchpanel
Use the stylus pen on the Touchpanel to move the cursor, mark elements and execute commands.
Ê
To remove the stylus pen from its holder, push the lock upwards lightly.
i
By default, the QuickPoint has been configured with the larger button as the primary one
(referred to as the left mouse button), and the smaller button as the secondary (right)
mouse button.
Ê
To move the cursor, drag the stylus pen across the display.
Ê To make a selection, tap the stylus pen against the display. This is equivalent to clicking the
left mouse button.
Ê
To execute a command, tap the stylus pen against the display twice. This is equivalent to
double-clicking the left mouse button.
Ê
To drag an object, hold down the left mouse button, tap the object to be moved with the stylus
pen across the display.
Ê
Release the left mouse button to move the object.
Calibrating the Touchpanel
The first time the system is used you must cal ibrate the Touchpanel.
Ê
Double-click the "Calibrate the Touchpanel" icon in the
Start
menu to start the calibration
utility.
Ê
The utility asks you to touch nine points on the display with the stylus pen.
Ê
Press the Enter key twice to save the results and exit. The Touchpanel is ready for use.
i
You need to recalibrate the Touchpanel if you change the display resolution.