Fujitsu Siemens Computers LIFEBOOK B Series, Руководство по эксплуатации, Страница: 23 / 75

Security Panel Working with your notebook
A26391-K105-Z120-1-7619
15
Security Panel
The security panel enables you to protect your notebook from unauthorised use with a hardware
password. When a Security Panel password is activated, the notebook will not start without the
correct insertion of a password. The password must be entered in order to enter the
BIOS Setup
utility.
Once a password has been assigned the notebook will not switch on, or Resume from Save-to-disk
without correct insertion of a password. The password is also required in order to resume from
energy saving functions such as Suspend and Standby.
Password protection of Save-to-RAM Mode is also supported. This function is set to
Enable
by
default but can be deactivated in
BIOS Setup
,
Security Panel on Resume
.
In the event that a user forgets their password, the two level password protection, supervisor and
user, enables the supervisor to unlock the machine and assign a new password.
!
In the event that the purchaser, having enabled the Security Panel Application, forgets
both passwords and becomes locked out of the notebook, it will be necessary to return the
notebook to one of our repair centres in order to have the code reset. This is not covered
by the notebook’s standard warranty, please call your customer service centre for
information on this service.
No passwords are assigned when the notebook is delivered. The passwords can be assigned with
the
FJSECS.EXE
(supervisor password) and
FJSECU.EXE
(user password) programmes, located in a
folder on the
Desktop
called
Add-On Software
. The supervisor password and the user password can
be assigned with up to 5 key entries. Multiple keys (1+2) can be used together as one key entry. By
pressing the Security Panel Enter key the password is saved.
i
The supervisor password has to be set before the user password can be assigned.
Assigning the passwords
The Security Panel Application software is located on your
Desktop
in the
Add-On Software
folder.
Assigning a supervisor password
Ê
Double-click on the
Add-On Software
folder on the
Desktop
.
Ê
Double click on the
Security Panel Application
folder.
Ê
Double-click on FJSECS.EXE to begin installation of the supervisor password application.
Follow the instructions in the dialogue box.
i
Under Windows 98 the setup dialogue box will not automatically close when password
setup programme is complete. Please close the dialogue box when the installation
procedure is finished.