Fujitsu Siemens Computers D1419, Техническое руководство, Страница: 19 / 32

Features
A26361-D1419-Z120-1-7419
English - 11
Default Settings in the menu Configure/View SCSI Controller Settings
SCSI Bus Interface Definitions Default setting
SCSI Controller ID 7
SCSI Controller Parity Enabled
SCSI Controller Termination Enabled
Additional Options Default setting
Boot Device Configuration Press <Enter>
Single Image
Master SCSI Controller AIC-7902 at slot 00 00:04:00
Select SCSI peripheral from which to boot
Boot SCSI Controller AIC-7902 at slot 00 00:04:00
Boot SCSI ID 0
Boot LUN number* 0
SCSI Device Configuration Press <Enter>
Sync Transfer Rate (MB/Sec) 320
Packetized Yes
QAS Yes
Initiate wide negotiation Yes (Enabled)
Enable disconnection Yes (Enabled)
Send Start Unit Command**** Yes
BIOS Multiple LUN Support No
Include in BIOS Scan Yes
Advanced Configuration Press <Enter>
Reset SCSI Bus at IC Initialization Enabled
Display <Ctrl><A> Message During BIOS Initialization Enabled
Extended Int 13 Translation for DOS Drives > 1Gbyte Enabled
POST Display Mode Verbose
SCSI Controller Int 13 Support Enabled
Domain Validation**** Enabled
Support Removable Disks Under Int 13as Fixed Disks**** Disabled
BIOS Support for Bootable CD-ROM**** Enabled
* The setting is valid only if
Multiple LUN Support
is
enabled
.
**** The setting is valid only if the Int 13 Support of the SCSI controller is enabled (
Enabled
).