Fujitsu Siemens Computers AMILO Si 2636, Легкое руководство

Страница: 59 / 83

Connecting external devices
eSATA/USB combination port
Additional USB devices or an external SATA hard disk can be connected to the eSATA/USB
combination port. This allows you to expand the internal hard disk capacity as you
wish. You should obtain a hard disk with a robust casing.
You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA
or a mobile phone or to connect a USB lamp), even if the notebook is switched off.
The length of the eSATA cable must not exceed 2 metres. SATA cables cannot
be used because the pin occupancy is different. The cable is not included in
the delivery scope. It can be obtained through your retailer.
The data transfer rate is up to 2,400 Mbit/s.
eSATA
► Connect the data cable to the external
device.
► Connect the data cable to the eSATA/USB
combination port of the notebook.
Device drivers
The eSATA hard disk or the USB device is automatically detected
and installed by your operating system.
You can fi nd more information in the documentation supplied for the external SATA
hard disk, the USB device and the
operating system
.
10600903218, edition 1 49