FujiFilm Xerox Phaser 6270 Скачать руководство пользователя страница 79

Страница: 79 / 90

4.3 Adjusting the Image Transfer Voltage

4.3

Adjusting the Image Transfer Voltage

When you have unsatisfactory printing results, such as having white spots on the printed
image, having extra toner spilt on the printout, or a bluish printout, adjust the image transfer
voltage to solve these printing problems.

The image transfer voltage can be adjusted for each paper type within the range of -3 to 3
in increments of 1. The default is "0".

On the following condition, move to up the value:

• Toner scatters around images.

• Images is turned to bluish color.

• Output is too light. (faded or unclear)

Use the following procedure to adjust the image transfer voltage.

Press the <Menu> button on the control
panel to display the menu screen.

Press the <

> button until [Admin Menu] is

displayed.

Press the <

> or <Eject/Set> button to

accept the selection.
[Wired Network] is displayed.

Press the <

> button until [Maintenance

Mode] is displayed.

Press the <

> or <Eject/Set> button to

accept the selection.
[F/W Version] is displayed.

Press the <

> button until [Adjust BTR] is

displayed.

Press the <

> or <Eject/Set> button to

accept the selection.
[Plain Paper] is displayed.

Press the <

> button until the paper type

you want to set is displayed.
(Example: Recycled Paper)

Press the <

> or <Eject/Set> button to

accept the selection.
A screen that allows you to enter the value
is displayed.

Report / List

Admin Menu

Wired Network

Admin Menu

Maintenance Mode

F/W Version

Maintenance Mode

Adjust BTR

Plain Paper

Adjust BTR

Heavyweight 2

0 *

Содержание Xerox Phaser 6270



























































































Результаты поиска

Содержание Xerox Phaser 6270

Отзывы:

FujiFilm Xerox Phaser 6270, Руководство пользователя, Страница: 79 / 90

Результаты поиска

Содержание Xerox Phaser 6270

Отзывы: