FujiFilm Xerox Phaser 6270, Руководство пользователя, Страница: 38 / 90

38
2 Control Panel Menus
Panel Settings
Specifies whether to limit menu operations with a password to avoid changing the printer
settings by accident.
Initialize NVM Initializes the settings stored in the NVM except for the network settings. The NV
memory is nonvolatile memory that retains the settings of the printer even when its
power is switched off. After executing this function and restarting the printer, all the
menu options are reset to their default values.
Note
• You cannot execute this menu during printing.
• You need to restart the printer to activate this setting. After making the setting, switch
the printer off and then on again.
Storage Disk Clears the RAM disk. Use this menu to delete all of the data in the RAM disk.
Format Hard Disk This printer does not support this menu.
Item Description
Panel Lock Sets whether to limit the menu operations with a password. Selecting [On] requires the
operator to enter the password. If [On] is set, then you must enter the password to use
the [Admin Menu].
• [Off] (default)
• [On]
Change Password Allows you to change the password. Enter a new password (4-digit number). The pass-
word takes effect when the first and second entries match. (default: [0000])
Note
• [Change Password] is valid only if [Panel Lock] is set to [On].
• If the first and second entries do not match, your new password will not be accepted.
• If you have forgotten the password, switch the printer off and restore the password to
the default.
1.Switch the printer on while holding down the <Menu> button. Keep holding down
the button until [Reset Password Reset?] appears on the control panel.
2.Release the <Menu> button and press the <Eject/Set> button.
3.Press the < > button to select [Yes], then press the <Eject/Set> button. The
password is restored to the default.
Item Description