FujiFilm Xerox Phaser 6270, Руководство пользователя, Страница: 63 / 90

3.8 Error Messages Regarding Printer
63
Open Tray 2
Clear Jam
Open & Close
Cover A Paper is jammed inside Tray 2. Remove the jammed paper. Open and close the front
cover.
Refer to
• “3.3 Clearing Paper Jams”
Out of Memory
Press SET The printer memory is full and cannot continue processing the current print job.
• Press the <Eject/Set> button to clear the message, cancel the current print job,and
conduct the next print job, if any.
• Press the <Cancel Job> button to cancel the print job.
• Press the <Menu> button to open the Print Menu and delete the job being held.
• To avoid this error in the future, do the following:
-Delete unnecessary fonts, macros, and other data in printer memory.
Collate Full
Press SET The printer memory is full and cannot continue processing the collated printing.
• Press the <Eject/Set> button to clear the message, cancel the current print job,
and conduct the next print job, if any.
• Press the <Cancel Job> button to cancel the print job.
• Press the <Menu> button to open the Print Menu and delete the job being held.
• To avoid this error in the future, do the following:
-Delete unnecessary fonts, macros, and other data in printer memory.
Disk Full
Press SET The printer memory is full and cannot continue processing the current print job.
• Press the <Eject/Set> button to clear the message, cancel the current print job,and
conduct the next print job, if any.
• Press the <Cancel Job> button to cancel the print job.
• Press the <Menu> button to open the Print Menu and delete the current job.
• To avoid this error in the future, do the following:
-Reduce the number of print pages such as splitting the print data.
-Increase free memory space by deleting unnecessary data in the printer.
Ready to print
Over Heat
Ready to print
Turned Halfmode
The printer internal temperature is too high. Processing on the printer has been
slowed down. When the internal temperature falls, the processing speed will
automatically rise.
Ready to print
Non-genuineToner The printer is in the custom toner mode. Though some of the print cartridges reach
the end of their lives, you can continue printing.
Reboot printer
(NNN-NNN) Error NNN-NNN relates to printer problems. Switch the printer off and then on. If the
error continues, contact your local dealer.
Reboot printer
(116-NNN) Error NNN-NNN relates to printer problems. Switch the printer off and then on. If the
error continues, contact your local dealer.
Reboot printer
(072-215) The 550 sheet feeder is not installed correctly or is not working correctly due to
damage or malfunction. Reinstall the sheet feeder.
Reboot printer
(077-215) The duplex unit is not installed correctly or is not working correctly due to damage or
malfunction. Reinstall the duplex unit.
Reboot printer
(116-316) The memory is not installed correctly or is not working correctly due to damage or
malfunction. Reinstall the memory.
Reboot printer
(116-320) An unsupported memory is installed. Replace the specified memory.
Load xxxx
XXXXXXXX
Load xxxx
YYYYYYYY
Tray xxxx is out of paper, or the specified paper could not be detected in tray xxxx.
Supply Tray xxxx with the following size, direction, and type of paper: XXXX.
xxx indicates the number of the tray or bypass tray.
Refer to
• “1.4 Loading Paper”
SysError NNN-NNN
Press SET A system error has occurred. Press the <Eject/Set> button to clear the message. If
the error continues, contact your local dealer.
Message Condition/Reason/Action